Product Tables

 





  Home > Bearing By Types > Bearings by Brand > Nachi Bearing >

45BNC10S Nachi Angular Contact Bearing 45x75x16 Abec-7 Japan Bearings
45BNC10S Nachi Angular Contact 45x75x16 Abec-7 Japan
45BNC10S Nachi Angular Contact 45x75x16 Abec-7 Japan


 
Our Price: $814.74
Inner Diameter: Item: 45BNC10S Nachi Ball Bearings
Outer Diameter: Type: Nachi Angular Ball Bearings
Width Diameter: Cage: Polyamide resin cage
Model: Quality: ABEC-7 (P4 quality)
Standard: Dimensions: 45mm x 75mm x 16mm/Metric


Product Code: 45BNC10S-NACHI-457516-JAPAN

Description
 

High Precision Ball Bearings 45BNC10S Nachi Angular Ball Bearings Abec-7 45mm x 75mm x 16mm Made in Japan 45BNC10S Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.

  • Item: 45BNC10S Nachi Ball Bearings
  • Type: Nachi Angular Ball Bearings
  • Cage: Polyamide resin cage
  • Quality: ABEC-7 (P4 quality)
  • Dimensions: 45mm x 75mm x 16mm/Metric
  • ID (inner diameter)/Bore: 45mm
  • OD (outer diameter): 75mm
  • Width/Height/thickness: 16mm
  • Size: 45mm x 75mm x 16mm
  • Quantity: Pair of Bearings
  • Dynamic load rating Cr: 40,000 N
  • Static load rating Cor: 39,000 N
  • Limiting Speed:
  • Grease Lubrication: 10,000 RPM
  • Oil Lubrication: 14,000 RPM
  • Made in Japan Dimensions d D B r r1 a 45mm 75mm 16mm 1mm 0.6mm -1.1mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    45BNC10S Nachi Angular Contact Bearing 45x75x16 Abec-7 Japan Bearings

    Kit14709


  • Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand
    Bearing By Types