Product Tables

 





  Home > Bearing By Types > Bearings by Brand > Nachi Bearing >

7203CYDUP4BNLS Nachi Angular Contact 17x40x12 Ball Bearings Japan
7203CYDUP4BNLS Nachi Angular Contact 17x40x12 Ball Japan
7203CYDUP4BNLS Nachi Angular Contact 17x40x12 Ball Japan


 
Our Price: $234.88
Inner Diameter: Item: 7203CYDUP4BNLS Angular Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Dimensions: 17mm x 40mm x 12mm/Metric
Model: Bearing Inner Diameter: 17mm
Standard: Bearing Outer Diameter: 40mm


Product Code: 7203CYDUP4BNLS-NACHI-174012

Description
 

7203CYDUP4BNLS Nachi Angular Abec-7 Ball Bearing 17mm x 40mm x 12mm 15 Contact Angle Polyamide resin cage Made in Japan 7203CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Bearing is Abec-7, 7203CYDUP4BNLS inner diameter is 17mm, 7203CYDUP4BNLS outer diameter is 40mm, 7203CYDUP4BNLS width is 12mm, Made in Japan.

  • Item: 7203CYDUP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 17mm x 40mm x 12mm/Metric
  • Bearing Inner Diameter: 17mm
  • Bearing Outer Diameter: 40mm
  • Bearing Width: 12mm
  • Size: 17 x 40 x 12 mm
  • Quality: Abec-7
  • Cage: Polyamide resin cage
  • Basic Dynamic Load Cr (KN): 10.9
  • Made in Japan
  • Quantity: One Bearing d D B r r1 17mm 40mm 12mm 0.6 0.3 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7203CYDUP4BNLS Nachi Angular Contact 17x40x12 Ball Bearings Japan

    Kit20587


  • Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand
    Bearing By Types