Product Tables

 





  Home > Metric Bearings > 50mm inner diameter Bearings >

7210BMU Nachi Angular Contact Bearing 50x90x20 Brass Cage C3 Bearings
7210BMU Nachi Angular Contact 50x90x20 Brass Cage C3
7210BMU Nachi Angular Contact 50x90x20 Brass Cage C3


 
Our Price: $143.76
Inner Diameter: Item: 7210BMU Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Brass Cage
Model: Radial Clearance: C3
Standard: Dimensions: 50mm x 90mm x 20mm/Metric


Product Code: 7210BMU-NACHI-509020-BRASS-C3

Description
 

7210BMU Nachi Angular Ball Bearing 40 Contact Angle Brass Cage & Flush Ground 50mm x 90mm x 20mm Made in Japan 7210BMU Nachi Angular Ball Bearings, bearing is 40 Contact Angle, Brass Cage and Flush Ground, Made in Japan, inner diameter is 50mm, outer diameter is 90mm and width is 20mm.

  • Item: 7210BMU Nachi Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Brass Cage
  • Radial Clearance: C3
  • Dimensions: 50mm x 90mm x 20mm/Metric
  • ID (inner diameter)/Bore: 50mm
  • OD (outer diameter): 90mm
  • Width/Height/thickness: 20mm
  • Size: 50 x 90 x 20 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 38,500 N
  • Static load rating Cor: 29,600 N
  • Limiting Speed:
  • Grease Lubrication: 5,600 RPM
  • Oil Lubrication: 7,500 RPM
  • Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7210BMU Nachi Angular Contact Bearing 50x90x20 Brass Cage C3 Bearings

    Kit9975


  • Share your knowledge of this product. Be the first to write a review »

    Browse for more products in the same category as this item:

    Metric Bearings > 50mm inner diameter Bearings
    Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
    Bearing By Types > Angular Contact Ball Bearings
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
    Bearing By Types > Bearings by Brand > Nachi Bearing
    Bearing By Types > Bearings by Brand
    Bearing By Types
    Metric Bearings