Product Tables

Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7211 Nachi Angular Contact Bearing C3 Japan 55x100x21 Bearings

7211 Nachi Angular Contact Bearing C3 Japan 55x100x21

Our Price: $102.74

Inner Diameter: Item: 7211 Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Steel Cage
Model: Dimensions: 55mm x 100mm x 21mm/Metric
Standard: ID (inner diameter)/Bore: 55mm

Product Code: 7211-NACHI-C3-JAPAN-55X100X21

Description

7211 Nachi Angular Ball Bearing 40 Contact Angle & Steel Cage 55mm x 100mm x 21mm Made in Japan 7211 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 55mm, outer diameter is 100mm and width is 21mm.

Item: 7211 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Steel Cage

Dimensions: 55mm x 100mm x 21mm/Metric

ID (inner diameter)/Bore: 55mm

OD (outer diameter D1): 100mm

Width/Height/thickness: 21mm

Size: 55 x 100 x 21 mm

Quantity: One Bearing

Dynamic load rating Cr: 51,000 N

Static load rating Cor: 39,500 N

Limiting Speed:

Grease Lubrication: 6,000 RPM

Oil Lubrication: 7,500 RPM

Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7211 Nachi Angular Contact Bearing C3 Japan 55x100x21 Bearings

Kit10021

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
Bearing By Types > Angular Contact Ball Bearings
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing
Metric Bearings > Bearings with Large inner diameter
Bearing By Types > Bearings by Brand
Bearing By Types
Metric Bearings