 |
 |
 |
|
7213CYDUP4BNLS Nachi Angular ABEC-7 Ball Bearings 65mm x 120mm x 23mm Made in Japan 7213CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, ABEC-7 Made in Japan, here are the dimensions of the 7213CYDUP4BNLS, the 7213CYDUP4BNLS inner diameter is 65mm, the 7213CYDUP4BNLS outer diameter is 120mm, 7213CYDUP4BNLS width is 23mm. Item: 7213CYDUP4BNLS Angular Ball Bearing Type: Nachi Angular Ball Bearing Quality: ABEC-7 Cage: Polyamide resin cage Dimensions: 65mm x 120mm x 23mm/Metric Bearing Inner Diameter: 65mm Bearing Outer Diameter: 120mm Bearing Width: 23mm Size: 65 x 120 x 23 mm Dynamic load rating Cr: 73,500 N Static load rating Cor: 59,000 N Limiting Speed: Grease Lubrication: 8,600 RPM Oil Lubrication: 12,000 RPM Quantity: One Bearing Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7213CYDUP4BNLS Nachi Angular Contact Bearing 65x120x23:Abec-7:JapanKit10817
|
|
|
 |
|
 |
|
