Product Tables

Home > Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings >

7216 Nachi Angular Contact Bearing C3 Japan 80x140x26 Bearings

7216 Nachi Angular Contact Bearing C3 Japan 80x140x26

Our Price: $174.74

Inner Diameter: Item: 7216 Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Steel Cage
Model: Dimensions: 80mm x 140mm x 26mm/Metric
Standard: ID (inner diameter)/Bore: 80mm

Product Code: 7216-NACHI-C3-JAPAN-80X140X26

Description

7216 Nachi Angular Ball Bearing 40 Contact Angle & Steel Cage 80mm x 140mm x 26mm Made in Japan 7216 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Bearing has Steel Cage, Made in Japan, inner diameter is 80mm, outer diameter is 140mm and width is 26mm.

Item: 7216 Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Steel Cage

Dimensions: 80mm x 140mm x 26mm/Metric

ID (inner diameter)/Bore: 80mm

OD (outer diameter): 140mm

Width/Height/thickness: 26mm

Size: 80 x 140 x 26 mm

Quantity: One Bearing

Dynamic load rating Cr: 89,000 N

Static load rating Cor: 76,500 N

Limiting Speed:

Grease Lubrication: 4,000 RPM

Oil Lubrication: 5,400 RPM

Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7216 Nachi Angular Contact Bearing C3 Japan 80x140x26 Bearings

Kit10026

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
Bearing By Types > Angular Contact Ball Bearings
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing
Metric Bearings > Bearings with Large inner diameter
Bearing By Types > Bearings by Brand
Bearing By Types
Metric Bearings