Product Tables

Home > Metric Bearings > 50mm inner diameter Bearings >

7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings

7310 Nachi Angular Contact Bearing C3 Japan 50x110x27

Our Price: $134.74

Inner Diameter: Item: 7310 Nachi Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Steel Cage
Model: Dimensions: 50mm x 110mm x 27mm/Metric
Standard: ID (inner diameter)/Bore: 50mm

Product Code: 7310-NACHI-C3-JAPAN-50X110X27

Description

7310 Nachi Angular Ball Bearing 40 Contact Angle & Steel Cage 50mm x 110mm x 27mm Made in Japan 7310 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, Steel Cage and Flush Ground, Made in Japan, inner diameter is 50mm, outer diameter is 110mm and width is 27mm.

Item: 7310 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Steel Cage

Dimensions: 50mm x 110mm x 27mm/Metric

ID (inner diameter)/Bore: 50mm

OD (outer diameter): 110mm

Width/Height/thickness: 27mm

Size: 50 x 110 x 27 mm

Quantity: One Bearing

Dynamic load rating Cr: 74,000 N

Static load rating Cor: 52,000 N

Limiting Speed:

Grease Lubrication: 5,600 RPM

Oil Lubrication: 7,500 RPM

Made in Japan Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7310 Nachi Angular Contact Bearing C3 Japan 50x110x27 Bearings

Kit10034

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Metric Bearings > 50mm inner diameter Bearings
Bearing By Types > Angular Contact Ball Bearings > Single Row Angular Contact Bearings
Bearing By Types > Angular Contact Ball Bearings
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi Single Row Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing
Bearing By Types > Bearings by Brand > Nachi Bearing
Bearing By Types > Bearings by Brand
Bearing By Types
Metric Bearings