 |
 |
 |
|
N314EG Nachi Cylindrical Roller Bearing 70mm x 150mm x 35mm Nylon Cage Made in Japan N314EG Nachi Cylindrical Roller Bearing, Nylon Cage, Made in Japan, the N314EG inner diameter is 70mm, the N314EG outer diameter is 150mm, N314EG width is 35mm. Item: N314EG Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Nylon Cage Dimensions: 70mm x 150mm x 35mm/Metric Inner Diameter: 70mm Outer Diameter: 150mm Width: 35mm Size: 70 x 150 x 35 mm Dynamic load rating Cr: 158,000 N Static load rating Cor: 220,000 N Limiting Speed: Grease Lubrication: 4,000 RPM Oil Lubrication: 5,000 RPM Quantity: One Bearing Made in Japan Nachi Cylindrical Roller Bearings Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.N314EG Nachi Cylindrical Roller Bearing 70x150x35 Japan BearingsKit10339
|
|
|
 |
|
 |
|
