 |
 |
 |
|
Nachi Cylindrical Roller Bearings NJ311 55mm x 120mm x 29mm Steel Cage Made in Japan NJ311 Nachi Cylindrical Roller Bearings, Steel Cage, Made in Japan, the NJ311 inner diameter is 55mm, the NJ311 outer diameter is 120mm, NJ311 width is 29mm. Item: NJ311 Roller Bearing Type: Nachi Cylindrical Roller Bearing Cage: Steel Cage Dimensions: 55mm x 120mm x 29mm/Metric ID (inner diameter)/Bore: 55mm OD (outer diameter): 120mm Width/Height/thickness: 29mm Size: 55 x 120 x 29 mm Quantity: One Bearing Dynamic load rating Cr: 110,000 N Static load rating Cor: 111,000 N Limiting Speed: Grease Lubrication: 5,000 RPM Oil Lubrication: 6,300 RPM Made in Japan Nachi Cylindrical Roller Bearings Construction of this roller bearing type is the simplest of all radial roller bearings. This bearing type is often used in high-speed applications. Because the inner ring, outer ring, and rollers are in line contact, this bearing type has a large radial load capacity. Various Cylindrical roller bearing configurations are:N,NJ,NF,NU,RNU : integral ribs (flanges) NH,NP,NUP,NUH : integral and loose ribs NN,NNU : double-row bearings Configurations having integral flanges or loose ribs on both the inner and outer rings can sustain a small amount of axial load. Since this bearing type supports axial loads as sliding action between the end of the rollers and flange faces, axial loading is limited. Double-row Cylindrical roller bearings are used for high-speed, high-accuracy applications such as; main spindle support for lathes, milling machines, and machining centers. Radial clearance of tapered-bore bearings can be adjusted during mounting of the bearing(s) onto the mating journal. Standard cages are pressed steel or polyamide resin. Machined cages of high-strength brass are used for bearings of large dimension or for high-speed applications.NJ311 Nachi Cylindrical Bearing 55x120x29 Steel Cage Japan BearingsKit10373
|
|
|
 |
|
 |
|
