Product Tables

Home > Bearings Type > Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi ABEC-5 Precision Bearings

We found 42 results matching your criteria.

Sort By:

Page of 5

7200BBNLS Nachi Angular Contact Bearing 10x30x9:Abec-5:Japan

7200BBNLS Nachi Angular Contact Bearing 10x30x9:Abec-5:Japan

Our Price: $134.74

7200BBNLS Nachi Abec-5 Angular Ball Bearing 10mm x 30mm x 9mm Made in Japan 7200BBNLS Nachi Angular Ball Bearing, 7200BBNLS inner diameter is 10mm, 7200BBNLS outer diameter is 30mm, 7200BBNLS width is 9mm.

Item: 7200BBNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 10mm x 30mm x 9mm/Metric

Bearing Inner Diameter: 10mm

Bearing Outer Diameter: 30mm

Bearing Width: 9mm

Size: 10 x 30 x 9 mm

Made in Japan

Quantity: One Bearing

7200BBNLS Nachi Angular Contact Bearing 10x30x9:Abec-5:Japan

Kit10804

7201BBNLS Nachi Angular Contact 12x32x10:Abec-5:Japan

7201BBNLS Nachi Angular Contact Bearing 12x32x10:Abec-5:Japan

Our Price: $138.98

7201BBNLS Nachi Angular Ball Bearing 12mm x 32mm x 10mm Made in Japan 7201BBNLS Nachi Angular Ball Bearings, 7201BBNLS inner diameter is 12mm, 7201BBNLS outer diameter is 32mm, 7201BBNLS width is 10mm, Made in Japan.

Item: 7201BBNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 12mm x 32mm x 10mm/Metric

Bearing Inner Diameter: 12mm

Bearing Outer Diameter: 32mm

Bearing Width: 10mm

Size: 12 x 32 x 10 mm

Made in Japan

Quantity: One Bearing

7201BBNLS Nachi Angular Contact Bearing 12x32x10:Abec-5:Japan

Kit10805

7000CYDUP4BNLS Nachi Angular Contact 10x26x8:Abec-5:Japan

7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan

Our Price: $139.54

7000CYDUP4BNLS Nachi Angular Abec-5 Ball Bearings 10mm x 26mm x 8mm 15 Contact Angle Polyamide resin cage Made in Japan 7000CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7000CYDUP4BNLS inner diameter is 10mm, 7000CYDUP4BNLS outer diameter is 26mm, 7000CYDUP4BNLS width is 8mm.

Item: 7000CYDUP4BNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearings

Dimensions: 10mm x 26mm x 8mm/Metric

Bearing Inner Diameter: 10mm

Bearing Outer Diameter: 26mm

Bearing Width: 8mm

Size: 10 x 26 x 8 mm

Cage: Polyamide resin cage

Quality: ABEC-5

Basic Dynamic Load Cr (KN): 5.35

Made in Japan

Quantity: One Bearing d D B r r1 10mm 26mm 8mm 0.3 0.15 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan

Kit10783

7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan

7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan

Our Price: $143.54

7202CYP5 Nachi Angular Ball Bearing 15mm x 35mm x 11mm 15 Contact Angle Polyamide resin cage Abec-5 Made in Japan 7202CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7202CYP5 inner diameter is 15mm, 7202CYP5 outer diameter is 35mm, 7202CYP5 width is 11mm.

Item: 7202CYP5 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 15mm x 35mm x 11mm/Metric

Bearing Inner Diameter: 15mm

Bearing Outer Diameter: 35mm

Bearing Width: 11mm

Size: 15mm x 35mm x 11mm

Quality: ABEC-5

Cage: Polyamide resin cage

Basic Dynamic Load Cr (KN): 8.70

Made in Japan

Quantity: One Bearing d D B r r1 15mm 35mm 11mm 0.6 0.3 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads. Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7202CYP5 Nachi Angular Contact Bearing 15x35x11:Abec-5:Japan

Kit10806

[BO] 7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

[BO] 7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

Our Price: $155.54

contain proper amount of grease inadvance.

[BO] 7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

Kit10807

7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

Our Price: $155.54

7203BBNLS Nachi Angular Ball Bearing 17mm x 40mm x 12mm Made in Japan 7203BBNLS Nachi Angular Ball Bearings, 7203BBNLS inner diameter is 17mm, 7203BBNLS outer diameter is 40mm, 7203BBNLS width is 12mm, Made in Japan.

Item: 7203BBNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 17mm x 40mm x 12mm/Metric

Bearing Inner Diameter: 17mm

Bearing Outer Diameter: 40mm

Bearing Width: 12mm

Size: 17 x 40 x 12 mm

Made in Japan

Quantity: One Bearing

7203BBNLS Nachi Angular Contact Bearing 17x40x12:Japan

Kit10807

7204CYP5 Nachi Angular Contact Bearing 20x47x14:Abec-5:Japan

7204CYP5 Nachi Angular Contact Bearing 20x47x14:Abec-5:Japan

Our Price: $174.74

Nachi Angular Ball Bearings 7204CYP5 20mm x 47mm x 14mm 15 Contact Angle Polyamide resin cage Abec-5 Made in Japan 7204CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7204CYP5, the 7204CYP5 inner diameter is 20mm, the 7204CYP5 outer diameter is 47mm, 7204CYP5 width is 14mm.

Item: 7204CYP5 Angular Ball Bearings

Dimensions: 20

14 mm/Metric

ID (inner diameter)/Bore=20mm

OD (outer diameter D1)=47mm

Width/Height/thickness=14mm

7204CYP5 Type: Nachi Angular Ball Bearings

Cage: Polyamide resin cage

Quality: ABEC-5

Basic Dynamic Load Cr (KN): 14.70

Size: 20mm x 47mm x 14mm

Made in Japan

Quantity: One Bearing 7204CYP5 d D B r r1 Basic Dynamic Load 20mm 47mm 14mm 1 0.6 14.70 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7204CYP5 Nachi Angular Contact Bearing 20x47x14:Abec-5:Japan

Kit10808

7205CYP5 Nachi Angular Contact Bearing 25x52x15:Abec-5:Japan

7205CYP5 Nachi Angular Contact Bearing 25x52x15:Abec-5:Japan

Our Price: $186.74

Nachi Angular Ball Bearings 7205CYP5 25mm x 52mm x 15mm 15 Contact Angle Polyamide resin cage Abec-5 Made in Japan 7205CYP5 Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, here are the dimensions of the 7205CYP5, the 7205CYP5 inner diameter is 25mm, the 7205CYP5 outer diameter is 52mm, 7205CYP5 width is 15mm.

Item: 7205CYP5 Angular Ball Bearings

Dimensions: 25

15 mm/Metric

ID (inner diameter)/Bore=25mm

OD (outer diameter D1)=52mm

Width/Height/thickness=15mm

7205CYP5 Type: Nachi Angular Ball Bearings

Cage: Polyamide resin cage

Quality: ABEC-5

Basic Dynamic Load Cr (KN): 16.70

Size: 25mm x 52mm x 15mm

Made in Japan

Quantity: One Bearing 7205CYP5 d D B r r1 Basic Dynamic Load 25mm 52mm 15mm 1 0.6 16.70 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7205CYP5 Nachi Angular Contact Bearing 25x52x15:Abec-5:Japan

Kit10809

7003CYDUP4BNLS Nachi Angular Contact 17x35x10:Abec-7:Japan

7003CYDUP4BNLS Nachi Angular Contact Bearing 17x35x10:Abec-7:Japan

Our Price: $191.90

7003CYDUP4BNLS Nachi Angular Abec-7 Ball Bearings 17mm x 35mm x 10mm 15 Contact Angle Polyamide resin cage Made in Japan 7003CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7003CYDUP4BNLS inner diameter is 17mm, 7003CYDUP4BNLS outer diameter is 35mm, 7003CYDUP4BNLS width is 10mm.

Item: 7003CYDUP4BNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 17mm x 35mm x 10mm/Metric

Bearing Inner Diameter: 17mm

Bearing Outer Diameter: 35mm

Bearing Width: 10mm

Size: 17 x 35 x 10 mm

Cage: Polyamide resin cage

Quality: ABEC-7

Basic Dynamic Load Cr (KN): 7.00

Made in Japan

Quantity: One Bearing d D B r r1 17mm 35mm 10mm 0.3 0.15 7.00 Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7003CYDUP4BNLS Nachi Angular Contact Bearing 17x35x10:Abec-7:Japan

Kit10786

7004CYDUP4BNLS Nachi Angular Contact 20x42x12:Abec-5:Japan

7004CYDUP4BNLS Nachi Angular Contact Bearing 20x42x12:Abec-5:Japan

Our Price: $221.90

7004CYDUP4BNLS Nachi Angular Abec-7 Ball Bearing 20mm x 42mm x 12mm 15 Contact Angle Polyamide resin cage Made in Japan 7004CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-7 Made in Japan, 7004CYDUP4BNLS inner diameter is 320mm, 7004CYDUP4BNLS outer diameter is 42mm, 7004CYDUP4BNLS width is 12mm.

Item: 7004CYDUP4BNLS Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 20mm x 42mm x 12mm/Metric

Bearing Inner Diameter: 20mm

Bearing Outer Diameter: 42mm

Bearing Width: 12mm

Size: 20 x 42 x 12 mm

Cage: Polyamide resin cage

Quality: Abec-7

Made in Japan

Quantity: One Bearing Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7004CYDUP4BNLS Nachi Angular Contact Bearing 20x42x12:Abec-5:Japan

Kit10787