Product Tables

Home > Bearings Type > Bearing By Types > Bearings by Brand > Nachi Bearing > Nachi Angular Contact Bearing > Nachi ABEC-7 Precision Bearings

We found 103 results matching your criteria.

Sort By:

Page of 11

7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan

7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan Bearings

Our Price: $207.54

High Precision Ball Bearing 7200CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 10mm x 30mm x 9mm Made in Japan 7200CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 10mm, outer diameter is 30mm and width is 9mm.

Item: 7200CYP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 10mm x 30mm x 9mm/Metric

ID (inner diameter)/Bore: 10mm

OD (outer diameter): 30mm

Width/Height/thickness: 9mm

Size: 10 x 30 x 9 mm

Quantity: One Bearing

Dynamic load rating Cr: 6,950 N

Static load rating Cor: 3,300 N

Limiting Speed:

Grease Lubrication: 40,000 RPM

Oil Lubrication: 55,000 RPM

Made in Japan Dimensions d D B r r1 a 10mm 30mm 9mm 0.6mm 0.3mm -2.2mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7200CYP4 Nachi Angular Contact Bearing 10x30x9 Abec-7 Japan Bearings

Kit10846

7000CYP4 Nachi Angular Contact Bearing 10x26x8 Abec-7 Japan

7000CYP4 Nachi Angular Contact Bearing 10x26x8 Abec-7 Japan Bearings

Our Price: $214.74

Precision Rolling Bearing 7000CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 10mm x 26mm x 8mm Made in Japan 7000CYP4 Nachi Angular Ball Bearing, bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7 Made in Japan, inner diameter is 10mm, outer diameter is 26mm and width is 8mm.

Item: 7000CYP4 Ball Bearing

Type: Nachi Angular Ball Bearing

Dimensions: 10mm x 26mm x 8mm/Metric

ID (inner diameter)/Bore: 10mm

OD (outer diameter): 26mm

Width/Height/thickness: 8mm

Size: 10 x 26 x 8 mm

Quantity: One Bearing

Cage: Polyamide resin cage

Quality: ABEC-7

Made in Japan Dimensions d D B r r1 10mm 26mm 8mm 0.3mm 0.15mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7000CYP4 Nachi Angular Contact Bearing 10x26x8 Abec-7 Japan Bearings

Kit10825

7201CYP4 Nachi Angular Contact 12x32x10 Abec-7 Japan

7201CYP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Japan Bearings

Our Price: $214.74

High Precision Ball Bearing 7201CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 12mm x 32mm x 10mm Made in Japan 7201CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, ABEC-7 (P4) quality and made in Japan, inner diameter is 12mm, outer diameter is 32mm and width is 10mm.

Item: 7201CYP4 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 12mm x 32mm x 10mm/Metric

ID (inner diameter)/Bore: 12mm

OD (outer diameter): 32mm

Width/Height/thickness: 10mm

Size: 12 x 32 x 10 mm

Quantity: One Bearing

Dynamic load rating Cr: 7,950 N

Static load rating Cor: 3,900 N

Limiting Speed:

Grease Lubrication: 36,000 RPM

Oil Lubrication: 50,000 RPM

Made in Japan Dimensions d D B r r1 a 12mm 32mm 10mm 0.6mm 0.3mm -2.5mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7201CYP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Japan Bearings

Kit10847

7202CYP4 Nachi Angular Contact 15x35x11 Abec-7 Japan

7202CYP4 Nachi Angular Contact Bearing 15x35x11 Abec-7 Japan Bearings

Our Price: $218.74

High Precision Ball Bearing 7202CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 15mm x 35mm x 11mm Made in Japan 7202CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 15mm, outer diameter is 35mm and width is 11mm.

Item: 7202CYP4 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 15mm x 35mm x 11mm/Metric

ID (inner diameter)/Bore: 15mm

OD (outer diameter): 35mm

Width/Height/thickness: 11mm

Size: 15 x 35 x 11 mm

Quantity: One Bearing

Dynamic load rating Cr: 8,700 N

Static load rating Cor: 4,550 N

Limiting Speed:

Grease Lubrication: 32,000 RPM

Oil Lubrication: 44,000 RPM

Made in Japan Dimensions d D B r r1 a 15mm 35mm 11mm 0.6mm 0.3mm -2.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7202CYP4 Nachi Angular Contact Bearing 15x35x11 Abec-7 Japan Bearings

Kit10848

7001CYP4 Nachi Angular Contact Bearing 12x28x8 Abec-7 Japan

7001CYP4 Nachi Angular Contact Bearing 12x28x8 Abec-7 Japan Bearings

Our Price: $222.74

Precision Rolling Bearing 7001CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 12mm x 28mm x 8mm Made in Japan 7001CYP4 Nachi Angular Ball Bearing, Bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 12mm, outer diameter is 28mm and width is 8mm.

Item: 7001CYP4 Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7

Dimensions: 12mm x 28mm x 8mm/Metric

ID (inner diameter)/Bore: 12mm

OD (outer diameter): 28mm

Width/Height/thickness: 8mm

Size: 12 x 28 x 8 mm

Quantity: One Bearing

Made in Japan Dimensions d D B r r1 a 12mm 28mm 8mm 0.3mm 0.15mm -1.7mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7001CYP4 Nachi Angular Contact Bearing 12x28x8 Abec-7 Japan Bearings

Kit10826

7002CYP4 Nachi Angular Contact Bearing 15x32x9 Abec-7 Japan

7002CYP4 Nachi Angular Contact Bearing 15x32x9 Abec-7 Japan Bearings

Our Price: $226.74

Precision Rolling Bearing 7002CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 15mm x 32mm x 9mm Made in Japan 7002CYP4 Nachi Angular Ball Bearing, Bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 15mm, outer diameter is 32mm and width is 9mm.

Item: 7002CYP4 Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7

Dimensions: 15mm x 32mm x 9mm/Metric

ID (inner diameter)/Bore: 15mm

OD (outer diameter): 32mm

Width/Height/thickness: 9mm

Size: 15m x 32 x 9 mm

Quantity: One Bearing

Made in Japan Dimensions d D B r r1 a 15mm 32mm 9mm 0.3mm 0.15mm -1.8mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7002CYP4 Nachi Angular Contact Bearing 15x32x9 Abec-7 Japan Bearings

Kit10827

7205CYP4 Nachi Angular Contact 25x52x15 Abec-7 Japan

7205CYP4 Nachi Angular Contact Bearing 25x52x15 Abec-7 Japan Bearings

Our Price: $262.74

High Precision Ball Bearing 7205CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 25mm x 52mm x 15mm Made in Japan 7205CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 25mm, outer diameter is 52mm and width is 15mm.

Item: 7205CYP4 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 25mm x 52mm x 15mm/Metric

ID (inner diameter)/Bore: 25mm

OD (outer diameter): 52mm

Width/Height/thickness: 15mm

Size: 25 x 52 x 15 mm

Quantity: One Bearing

Dynamic load rating Cr: 16,700 N

Static load rating Cor: 10,300 N

Limiting Speed:

Grease Lubrication: 21,000 RPM

Oil Lubrication: 29,000 RPM

Made in Japan Dimensions d D B r r1 25mm 52mm 15mm 1mm 0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7205CYP4 Nachi Angular Contact Bearing 25x52x15 Abec-7 Japan Bearings

Kit10851

7005CYP4 Nachi Angular Contact 25x47x12 Abec-7 Japan

7005CYP4 Nachi Angular Contact Bearing 25x47x12 Abec-7 Japan Bearings

Our Price: $275.76

Precision Rolling Bearing 7005CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 25mm x 47mm x 12mm Made in Japan 7005CYP4 Nachi Angular Ball Bearing, Bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 25mm, outer diameter is 47mm and width is 12mm.

Item: 7005CYP4 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7

Dimensions: 25mm x 47mm x 12mm/Metric

Bearing Inner Diameter: 25mm

Bearing Outer Diameter: 47mm

Width/Height/thickness; 12mm

Size: 25 x 47 x 12 mm

Quantity: One Bearing

Made in Japan Dimensions d D B r r1 25mm 47mm 12mm 0.6mm 0.3mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7005CYP4 Nachi Angular Contact Bearing 25x47x12 Abec-7 Japan Bearings

Kit10830

7203CYP4 Nachi Angular Contact 17x40x12 Abec-7 Japan

7203CYP4 Nachi Angular Contact Bearing 17x40x12 Abec-7 Japan Bearings

Our Price: $283.76

High Precision Ball Bearing 7203CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Abec-7 17mm x 40mm x 12mm Made in Japan 7203CYP4 Nachi high precision Angular Ball Bearing with 15 degrees contact angle and Polyamide resin cage, bearing is ABEC-7 (P4) quality and made in Japan, inner diameter is 17mm, outer diameter is 40mm and width is 12mm.

Item: 7203CYP4 Nachi Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7 (P4 quality)

Dimensions: 17mm x 40mm x 12mm/Metric

ID (inner diameter)/Bore: 17mm

OD (outer diameter): 40mm

Width/Height/thickness: 12mm

Size: 17mm x 40mm x 12mm

Quantity: One Bearing

Dynamic load rating Cr: 10,900 N

Static load rating Cor: 5,900 N

Limiting Speed:

Grease Lubrication: 28,000 RPM

Oil Lubrication: 39,000 RPM

Made in Japan Dimensions d D B r r1 a 17mm 40mm 12mm 0.6mm 0.3mm -2.7mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7203CYP4 Nachi Angular Contact Bearing 17x40x12 Abec-7 Japan Bearings

Kit10849

7204CYP4 Nachi Angular Contact 20x47x14 Abec-7 Japan

7204CYP4 Nachi Angular Contact Bearing 20x47x14 Abec-7 Japan Bearings

Our Price: $283.76

Precision Rolling Bearing 7204CYP4 Nachi Angular Ball Bearing 15 degrees Contact Angle Polyamide resin cage Abec-7 20mm x 47mm x 17mm Made in Japan 7204CYP4 Nachi Angular Ball Bearing, Bearing is Precision Rolling, bearing is 15 degrees Contact Angle, Polyamide resin cage and Abec-7, Made in Japan, inner diameter is 20mm, outer diameter is 47mm and width is 17mm.

Item: 7204CYP4 Angular Ball Bearing

Type: Nachi Angular Ball Bearing

Cage: Polyamide resin cage

Quality: ABEC-7

Dimensions: 20mm x 47mm x 17mm/Metric

Bearing Inner Diameter: 20mm

Bearing Outer Diameter: 47mm

Width/Height/thickness; 17mm

Size: 20 x 47 x 17 mm

Quantity: One Bearing

Made in Japan Dimensions d D B r r1 20mm 47mm 17mm 1mm 0.6mm Nachi Single Row Angular Contact Bearing The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

7204CYP4 Nachi Angular Contact Bearing 20x47x14 Abec-7 Japan Bearings

Kit10850